Categories

False alarms and system hiccups can be exasperating, and even more concerning, may prevent your security system from doing its job effectively. Thankfully, most problems, from false alarms to dead batteries, are straightforward to remedy. Explore our recommendations for troubleshooting your home alarm system in Omaha. We’ll help keep your family members shielded and your system operating as it should.

Test Your Home Security System In Omaha

One great way to troubleshoot your property’s security is to test it! Modern systems have a test mode so you don’t accidentally initiate an emergency call. After moving to test mode, follow these steps:

• Arm your system as you would when you head out.
• Open a window or door that has a contact sensor, or test other devices. Close the door or window once you’re done so it doesn’t trigger the alarm when you leave test mode.
• Permit the alarm to sound for 60 seconds to ensure communications with the security company and to make an entry in the alarm activity log.
• Proceed to test sensors as needed
• Inspect the systems’s activity log to validate that everything’s working.

Don’t worry, monitoring professionals can see that your alarm system is being tested. Just make sure to turn test mode off when done. It’s smart to test every other month or anytime you make changes to your home’s phone or internet service.

Inspect The Positioning And Condition Of Motion Detectors

Although an essential aspect of your alarm system, motion detectors are prone to false alarms. Prevent them with a few simple troubleshooting steps.

• Conduct a physical inspection. Are there things that could move within the sensor’s detection area, like drapery caught in a breeze?
• Is the sensor clean? Dirt, cobwebs, and debris can cause poor performance. Ensure the device is clean.
• Does the motion detector offer pet immunity you can turn on? Some sensors can be set to disregard pets weighing up to 100 pounds.
• When was the battery replaced? A nearly depleted battery may affect performance or cause false alarms.
• Is the sensor facing a source of heat? Excess heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries On Hand And Look Out For Low Battery Warnings

One helpful benefit of the latest home security systems is that they’ll notify you when batteries are dying. If your system is equipped with a smartphone app or control panel, you’ll usually discover alerts there. Depending on the alarm, you could hear an intermittent beep when batteries are running out. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that should be replaced every 1 to 2 years. It’s best to keep batteries on hand and establish a replacement schedule. Top systems also have a rechargeable backup battery for the central control panel. This battery keeps your system functioning if your power goes out and should recharge itself once power is back online. If it doesn’t, you should replace it.

Troubleshooting Is Effortless With ADT Home Security In Omaha 

As the top name in home security, ADT builds systems that provide unrivaled functionality and convenience. Accessing test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always be sent notifications when a battery is nearing depletion. Contact Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system ideal for your Omaha home and family. Dial (402) 277-9885 or fill out our form today!